JET Tools J-7040-4 Horizontal Bandsaw 460V 3PH
The JET J-7040-4 is a 10 x 16-inch horizontal bandsaw wired for 460V three-phase power, with an adjustable six-point blade guide system using cam follower bearings on eccentric shafts. A variable speed drive, swing-away control panel, coolant system, and patented 3-jaw vise support faster setup and accurate cuts.
Features
- Swing away control panel houses major saw controls.
- Variable speed drive system allows the operator to easily fine tune the blade speed.
- Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades.
- Heavy-Duty transmission utilizes hardened and ground gears operating in an oil bath.
- Patented 3-Jaw vise with rapid action moveable jaw for faster set up.
- One-piece wheel cover.
- Coolant system.
- Adjustable material stop.
- Bi-Metal blade.
Specifications
| Model Number | J-7040-4 |
| Blade Speeds (SFPM) | 100 – 350 |
| Blade Wheel Diameter (In.) | 14 |
| Drive | Variable Speed |
| Motor (HP) | 2 HP, 460V, 3Ph |
| Overall Dimensions (L x W x H) (In.) | 75-1/2 x 33 x 41 |
| Rectangle at 45 Degrees (In.) | 6-1/2 x 11 |
| Rectangle at 90 Degrees (In.) | 10 x 10 and 7 x 16 |
| Round at 45 Degrees (In.) | 10 |
| Round at 90 Degrees (In.) | 10 |
| Vise Swivels (Deg.) | 45 |
| Weight (Lbs.) | 1025 |
WARNING: California Prop 65
Downloads
Manual
Warranty Information
