Gorman-Rupp SE2J3-E.5 115/1 2″ Submersible Dewatering Pump

Pump Casing: Gray Iron; Maximum Operating Pressure 26 psi

(179 kPa).*

Impeller: Gray Iron.

Motor Housing: Stainless Steel 304.

Rotor Shaft: Stainless Steel 304.

Upper and Lower Bearings: Open Single Row Ball.

O_Rings: Buna_N.

Wetted Hardware: Stainless Steel 304.

Lip Seal: Buna_N.

Strainer: Stainless Steel 304, 0.39“ x 0.24” (9,9 x 6,1 mm) Dia. Oval Openings.

Standard Equipment: Lifting Handle. 2” (51 mm) NPT Discharge Adaptor. Built_In Thermal Overload Protection.

MOTOR/CABLE SPECIFICATIONS

• MOTOR: 0.5 HP; 3400 RPM; 115 Volt, Single Phase, 60 Hz;6 Full Load Amps.
• POWER CABLE:3 Wire; Type STOW (PVC); 16/3 AWG. 2 Power Conductors, 1 Ground. Nominal Length 30 Ft. (9 m)
• RECOMMENDED GENERATOR SIZE:2 Kw.

SEAL SPECIFICATIONS

• Double, Mechanical, Oil Lubricated. Fluorocarbon Elastomers (DuPont Viton or Equivalent).
• Upper Faces: Carbon and Ceramic Rotating and Stationary Faces.
• Lower Faces: Silicon Carbide and Ceramic Rotating and Stationary Faces.
• Maximum Temperature of Liquid Pumped, 104F (40C).